114589 Lamb Ametek 114589 2-Stage Hazardous Duty 7.5 Inch Vacuum Motor, 230 Volt 114589
Product Code: 090-114589
Our Price: $1,999.99
Description
Lamb Ametek 114589 2-Stage Hazardous Duty 7.5 Inch Vacuum Motor, 230 Volt 114589-00 Motor Specs Motor Type: Bypass Discharge: Peripheral Bearings: Double Ball Bearing Sealed Vacuum: 58.0 inches Maximum Air Watts: 241 Maximum Air Flow: 129.9 CFM Maximum Amps: 4.7 Motor Life Expectancy of 1000 hours 11 Inches In Height 7.5 Inches Wide Description: This single-phase, two-pole universal motor series is totally enclosed, externally fan-cooled, and is combined with a centrifugal blower to produce vacuum airflow characteristics suited for vacuum blower applications. The motor is a 230 volt AC motor and incorporates class B insulation in the armature and field windings. The vacuum air is drawn into the bottom of the fan case and is discharged through openings between the upper and lower mounting flanges. Motor cooling air is drawn in the top of the die cast aluminum shell and is directed over the outside of the enclosed motor. An internal fan circulates air through the electrical parts to properly transfer heat to the outside housing of the motor. Application: This motor has been listed by Underwriters Laboratories Inc. Guide PTDR, File E-25653 for use in hazardous locations with respect to safety of operation as follows: Class I, Group D--Atmospheres containing gasoline,petroleum, naphtha, benzene, butane, propane,alcohols,acetone, benzol, lacquer solvent vapors, or natural gas. Class II, Group E--Atmospheres containing metal dust,including magnesium, aluminum, and their commercial alloys. Class II, Group F--Atmospheres containing carbon black,coal, or coke dust. Class II, Group G--Atmospheres containing flour, starch,or grain dusts. Note: These motors are designed for use in commercial and industrial vacuum equipment which employ filters to remove dirt from the air stream before reaching the vacuum fans. While these vacuum motors are listed for use in hazardous locations, that in itself does not mean that the end product has hazardous duty characteristics. The design of the equipment must be evaluated by Underwriters Laboratories Inc. or other listing or regulatory agency to determine if the end product is suitable for use in hazardous locations. When using AMETEK Lamb Electric bypass motors in machines that come in contact with foam, liquid (including water),or other foreign substances, the machine must be designed and constructed to prevent those substances from reaching the fan system, motor housing and electrical components. Lamb Electric vacuum motors other than hazardous duty models should not be applied in machines that come in contact with dry chemicals or other volatile materials. Failure to observe these precautions could cause flashing (depending on volatility) or electrical shock which could result in property damage and severe bodily injury, including death in extreme cases. All applications incorporating Lamb Electric motors should be submitted to appropriate organizations or agencies for testing specifically related to the safety of your equipment.