|
|
|
|
A New Standard of Clean. The Hoover Platinum Collection Cyclonic Bagless Vacuum combines WindTunnel Technology and Multi-Stage Cyclonic Filtration to remove more dirt from carpet than other bagless cyclonic upright models tested*.
Features:
- Removes More Dirt - The Hoover Platinum Collection Cyclonic Bagless Upright removes more dirt from carpet than other bagless cyclonic vacuum models tested, so you can efficiently achieve the clean results you expect in fewer passes.
- WindTunnel Technology - Hoover's Patented WindTunnel Technology features three distinct air tunnels to lift and remove dirt from carpets. WindTunnel Technology prevents dirt from scattering back onto your clean floor, so you can remove dirt in less time.
- No Loss of Suction - Multi-stage cyclonic filtration system
means that the air going through the filter is cleaner than the air
that was pulled into the vacuum so that the filter will stay clean
longer, and the vacuum will have no loss of suction*.
- HEPA Media - Filter made with HEPA media. HEPA media traps 99.97% of dirt, dust, and pollens down to 0.3 microns, for cleaner air than standard or allergen media.***
- Lifetime Filter - An easy, integrated reminder
tells you when to clean your lifetime washable filter, and automatically
registers your next cleaning date.
- Embedded Dirt Finder (EDF):
- Uses real time sonic technology to tell you when dirt is being
removed from your carpet and floors. The EDF indicator will illuminate
"DIRTY" as long as you are removing dirt from your carpet. Once dirt has
been removed from your carpet, the Embedded Dirt Finder indicator will turn green.
- Five-year limited warranty
Included Accessories:
- Crevice Tool
- Combination Dusting Brush & Upholstery Tool
- Aluminum Extension Wand
- Owner's manual
* Per ASTM F608 **Per IEC60312 4th Edition ***Per ASTM F2608Hoover UH70015 Platinum Collection Cyclonic Bagless Upright
Parts List / Schematic
Item
|
Models To Fit
|
Part Number
|
1. Handle Assembly
|
UH70010, UH70015
|
48663249
|
2. Handle Screw
|
UH70010, UH70015
|
21447236
|
3. Power Cord - 40
|
UH70010, UH70015
|
46383365
|
4. Carry Handle Assembly
|
UH70010, UH70015
|
48664005
|
5. Upper Cord Wrap
|
UH70010, UH70015
|
39442056
|
6. Lower Cord Wrap
|
UH70010, UH70015
|
39442059
|
7. Wand Assembly
|
UH70010, UH70015
|
48642104
|
8. Hose Assembly
|
UH70010, UH70015
|
43434279
|
9. Inlet Duct With Microphone Bracket (If Non EDF Version Is Needed, This Is To Be Ordered And Microphone Can Be Removed)
|
UH70010, UH70015
|
48511008
|
10. Power PCB Board Assembly
|
UH70010, UH70015
|
46851078
|
11. Single PCB Board Assembly
|
UH70010, UH70015
|
46851079
|
12. Motor Assembly With Shroud
|
UH70010, UH70015
|
43576229
|
13. Motor Cover Assembly
|
UH70010, UH70015
|
42191018
|
14. Exhaust Filter Cover Assembly
|
UH70010, UH70015
|
37257327
|
15. HEPA Filter
|
UH70010, UH70015
|
38765035
|
Body Screw # 8 -10 X .625 - Self Tapping
|
UH70010, UH70015
|
21447242
|
Screw # 4 - 10 X .500 - Self Tapping (Used for Wand Assembly, Clean Air Duct, Microphone)
|
UH70010, UH70015
|
21447526
|
Screw # 6 - 10 X .750 - Self Tapping (Used for Back Panel, J-Tube, Clean Air Duct)
|
UH70010, UH70015
|
21447527
|
Item
|
Models To Fit
|
Part Number
|
1. Complete Dirt Cup Assembly
|
UH70010, UH70015
|
43645063
|
2. Dirt Cup Filter
|
UH70010, UH70015
|
43615096
|
3. Crevice Tool
|
UH70010, UH70015
|
38617035
|
4. Furniture Tool Assembly
|
UH70010, UH70015
|
38614049
|
5. Umbrella Tube - Dirt Cup
|
UH70010, UH70015
|
38768050
|
Item
|
Models To Fit
|
Part Number
|
1. Hood - Right
|
UH70010, UH70015
|
37252123
|
2. Hood - Left
|
UH70010, UH70015
|
37252122
|
3. Trunnion Cover - Right
|
UH70010, UH70015
|
36131163
|
4. Trunnion Cover - Left
|
UH70010, UH70015
|
36131164
|
5. Hood - Center Non-Edf
|
UH70010
|
37243073
|
Hood - Center W/Edf Label
|
UH70015
|
42252B80
|
6. Transfer Pulley Assembly
|
UH70010, UH70015
|
43256008
|
7. Transfer Pulley Clamp
|
UH70010, UH70015
|
36171068
|
8. Idler Arm Assembly
|
UH70010, UH70015
|
43151026
|
9. Actuator Arm Trunnion
|
UH70010, UH70015
|
36171058
|
10. Idler Arm Clamp
|
UH70010, UH70015
|
36172061
|
11. Height Adjustment Motor Assembly
|
UH70010, UH70015
|
27271005
|
12. Lower Hose Assembly
|
UH70010, UH70015
|
43434280
|
13. Pivot Clamp
|
UH70010, UH70015
|
36171069
|
14. Handle Release Pedal
|
UH70010, UH70015
|
38434049
|
15. Handle Release Pedal Clamp
|
UH70010, UH70015
|
36436029
|
16. Nozzle Base Assembly With Wheels
|
UH70010, UH70015
|
42246154
|
17. Nozzle Liner
|
UH70010, UH70015
|
37243072
|
18. Edf PCB Assembly
|
UH70015
|
46851081
|
19. PCB Hall Assembly
|
UH70010, UH70015
|
46851082
|
20. Front Wheel Assembly
|
UH70010, UH70015
|
43248074
|
21. Bottom Plate / Nozzle Guard
|
UH70010, UH70015
|
42246152
|
22. Agitator / Brush Roll Assembly
|
UH70010, UH70015
|
48414156
|
23. V - Belt Agitator / Brush Roll
|
UH70010, UH70015
|
38528034
|
24. Poly V - Belt Pulley
|
UH70010, UH70015
|
38528050
|
Body Screw # 8 -10 X .625 - Self Tapping
|
UH70010, UH70015
|
21447242
|
Screw # 8 - 10 X 1.625 - Self Tapping (Used for Nozzle)
|
UH70010, UH70015
|
21447121
|
- Warranty: 5 Year(s)
- Bagless: Yes
- Auto Cord Rewind: No
- Brushroll Shutoff: Yes
- Full Bag Indicator: No
- Headlight: Yes
- Performance Check Indicator: No
- Ready to Use Hose: Yes
- Swivel Casters: No
- Cord Length: 40Feet
- Cordless: No
- Brushed Edge Cleaning: No
- Height Adjustment: Multiple
- Filtration: HEPA
- Replaceable Filter: Yes
- Grip Type: D-Shaped Handle
- Hose Length: 8Feet
- Hose Type: Stretch
- Available in US: Yes
- Product Family: Platinum Collection
- Motor Amps: 12Amps
- Bumper Type: Scuff Guard
- Nozzle Type: Wind Tunnel
- Nozzle Width: 14Inches
- Brush Type: Motorized Brushroll
- Product (Hand) Weight LB: 19Pounds
- Crevice Tool: Yes
- Dusting Brush: Yes
- On Board Tools: Yes
- Powered Hand Tool: No
- Wand: Yes
|
|
|
|
|
|
|